Відео

Sick builds man

Bud to rad was my favorite at uste thanks for the vid on axles was just about to get some any word when they mite bring uste back

Nice, I just recently got my Blackfoot up and running after many, many years. The brittle plastic, causes something to break everytime I drive it. Where do you get that body mount system? I need that!

This will be my motivation on my first rc / custom rc build 🤯 imma get the rc4wd 4runner body and use the j concepts 73s for a killer monster truck crawler.

What thickness sheet did you use?

what happen to CAPO GRT R34? do you complete or quit that car?

Ive got the real version of this truck

A what kind of Blackfoot? Did you say ta my ya? 😂

First - congratulations Mike on getting married! Chernabog also says congrats! I got hitched too back in July 2011. (Sheesh...has it been that long already?) Amazingly, my wife still puts up with me and all of my toys! Thank you for the update and I look forward to seeing all of those projects in future videos. At 6:01 you mentioned that the new Chatham CNC quad roll bar for Clod Busters was made by Stormer Hobbies. The only Clod Buster parts that knew of that were made and sold by Stormer were the 4:1 gear reduction units. The only company that I knew that made the aluminum quad roll bars was ESP. Was there some collaboration between Stormer and ESP that I was not aware of? I know that ESP at least sold the quad roll bar because it is in my ESP catalog from about 1988. I have often wondered about how popular it was because I have only seen it on one Clod Buster over the years, the ESP "King Clod." The ESP dual tube roll bar also seems to be pretty rare because I have only seen a few over the years. I like how Chatham CNC did not make a carbon copy of the roll bars too so people can tell the difference between an original and a new one. I am looking at the quad roll bar on the Chatham CNC website and comparing it to the original one on the ESP "King Clod" now and the new reproduction has chamfers on the side plates while the original one does not. Also, the Chatham one can be bolted to the bed with additional screws at the rear of the roll bar if holes are drilled through the bed floor. The quad roll bar on the "King Clod" does not have that option and it can only be secured via four screws in the original holes in the Tamiya Clod Buster body. I think that the Chatham CNC roll bars look much nicer than the ESP (or is that Stormer?) ones. They look like they are finished much nicer. My only complaint is that the optional bar for the Ram lights can only accommodate four lights. The one on the "King Clod" can hold five lights on it, which is really nice. They are a very tight fit on there though as the aluminum light bodies actually touch one another. Congrats again and I look forward to your next video!

Fantastic video and congratulations! It's a good thing that a horrible driver like me wasn't driving the Purple People Eater Clod Buster, otherwise it would have probably crashed into one of those chairs...or your ankle!

Congratulations and happy 2025! I hope you are very happy together for the rest of your life! It sure was a beautiful wedding... Camaro...🤩

Sick truck! I was watching several of your videos and was wondering what product you use for the door panel lines? Thanks!

Crazy glue! Just crazy!!! 😅

2 months ago I dug up my old clod Buster out of the basement it's been down there for 18 years I totally disassembled it and started from scratch I bought a ton of upgraded aluminum parts and just got mine all back together I'm pretty excited about it it looks really good I think

Awesome club Buster buddy

I think I have pink eye brah

I am a little late to the party but that is a beautiful Clod Buster! I nearly had a heart attack at 6:35 when it looked like it was going to roll over. Thank goodness it did not go "rubber side up" but I sure hope that the front end was not damaged in any way by the sand. Even that little "endo" would have freaked me out if I were driving! Thanks for the video of your truck in action. It took me back to the late 1980s when modified Clod Busters looked like that before the days of four link suspension systems.

do you get CD15829ED Rear seat and ceiling finish option?

Sick!

All ya show is how to cut a piece of plastic and spay paint it. Which is nothing really. How is it mounted, and on what bracket. Otherwise worthless.

We can see your breath. You have a heater next to you. You're in a tee shirt. I'm guessing Alaska!!

Front wheel well opening doesn't look proportional.....😮roll bar tube are to thick for the size of the truck 😢...still cool

🥰🥰🥰 me encanta!!!

Hi Mike, where can i purchase a driver like yrs?

Badass truck indeed and those wheels tho😍

Nicely done 🤘

just ran mine this past weekend for the first time, i love it!

Nicely done Mike!!

This is true,no shame ,unapologetic RC enthusiast. This might be the best thing I’ve ever seen. Awesome idea.

Scott has built some of the most beautiful Clodbusters, and this is one of his best I think. You are lucky to have added it to your collection.

What’s up, brother? Can you tell me where you got the rear bars in the back the chrome ones they’re awesome. Thanks in advance.

Thats SICK!!!!!!!!!!

OMG ... 😳 ... That is the SICKEST Blackfoot I've ever seen!!!! 😍

Hey brother ..what are the name of those tires and are they still being sold?

Have the body kit Have the I beam kit Have a lc 70 killer chassis kit leaf spring rear going to be sweet ,

why do Americans pronounce Japanese names so badly? Its Tam e ya "a" is pronounced the same as the "a" in ha ha ha "I" is pronounced like an "e "

What's the red model on the left?

$550 for this toy is ridiculous.

Nice that’s what it’s suppose to look like! Leaf under= GAY 😭

Did you have your axle housings chromed?

Beautiful little beast❤

Awesome looking Toyota with a 6 inch lift

Not sure if you realize just how accurate this song is for us out here in Hawaii...😂😂😂

Dang man that’s so sick lol

Love this product i now have 3 lifts for my RC displays

Yota

Hey brotha did you do a video on the square body lift?

Can you elaborate on the modifications you had to do to the Shrink Rc Mounts as well as the rear link front mounts? Currently building a similar truck and need to figure out the trailing arm setup. Thanks!

My quetion is when you going sell it to me..😂..wats your price?

Where you get the roll bar from?